Installing New Wheels

img
Loosening and tightening the front left wheel

The front left wheel bolt (if standing on the scooter) loosens by turning clockwise and tightens by turning anti clockwise.

 

When you have removed the wheel bolt please try not to misplace the small metal washer. Replace the wheel and attach this to the scooter with the metal washer.

img
Loosening and tightening the front right wheel

The front right wheel bolt (if standing on the scooter) loosens by turning anti clockwise and tightens by turning clockwise.

Replace the wheel and attach this to the scooter.

img
Loosening and tightening the rear wheels

The bolt that holds this into place loosens by turning anti clockwise.

The two rear wheels may both need to both be pulled out as they usually become stuck together.

These are two separate wheels and might need a little force to separate them. Once separated you can replace the wheel.

Once the wheels have been put back into place you can then put back in the bolt and tighten this by turning clockwise.