Salta al contenuto
Spedizione gratuita nel Regno Unito. Presto in lancio in Europa e negli Stati Uniti

Installing Shank Bolts

 

You will have originally been provided with an Allen Key / Screwdriver tool that will be needed for this repair.

Other Screwdrivers and Allen Keys of the correct size will also work.

img
Step 1

Place your 3Style Scooter® on a table or similar surface upside-down, this will allow you to have easy access to the bottom of the front of the scooter / steering column

 
img
Step 2

Remove the two bolts located at the top going through the metal plate.

 
img
Step 3

Then remove the small screws which also go through the bottom of the metal plate.

 
img
Step 4

Remove the metal plate.

 
img
Step 5

Remove the plastic guard.

 
img
Step 6

Pull the wheel axial off from the base and put this to one side.

 
img
Step 7

There are two small screws located on the base either side of the spring recess. Remove these two small screws.

 
img
Step 8

Pull on the coloured plastic to separate this from the black base.

 
img
Step 9

Always replace both the smaller screw of the bolt and the main part of the bolt. This is because there might be some damage to the thread of either part. To remove the larger part of the bolt pull up on the top part of the base and push the bolt out.

 
img
Step 10

Once both bolts have been removed discard the old bolts and then put in place the new bolts.

 
img
Step 11

When the new bolts have been put into place, push down on the top part of the base making sure the screw recess lines up with the holes on the bottom part of the base.

 
img
Step 12

Screw the 2 small screws back into place either side of the spring recess.

 
img
Step 13

Put the wheel axial back onto the scooter. Position this first onto the bolts and push the spring into the recess on the base of the scooter.

 
img
Step 14

Put back the plastic guard back into place.

 
img
Step 15

Put the metal plate back on the scooter and secure this into place with the two smaller ends of the shank bolts and finally the two smaller screws.