Replacing the Stem Collar Clamp on Your RGS-0 & RGS-1 Scooter

Changing the Stem Collar Clamp on Your RGS-0 & RGS-1 Scooter

Step 1:

Open up the stem collar clamp on the neck of your scooter.

Step 2:

Using a medium sized Allen key that came with your scooter, loosen the screw in the stem collar clamp by turning it anticlockwise.

Step 3:

Take out the screw from the collar clamp and place to a side.

Step 4:

Unscrew the side bolt on the clamp, but don't remove it completely.

Step 5:

Press the metal button on the scooter's neck and lift the handlebar up to detach it from the body.

Step 6:

Take the stem collar clamp mechanism off from the neck of the scooter.

Step 7:

Get your new stem collar clamp and attach it to the bottom of the handlebars.

Step 8:

Insert the handlebars back onto the body of the scooter with the stem collar clamp in place. Remember to push the metal button down at the same time so the handlebars fit properly onto the scooter.

Step 9:

Tighten the side bolt on the stem collar clamp.

Step 10:

Using the same Allen key as before, tighten the screw back onto the stem collar clamp by turning clockwise.

Step 11:

Close the stem collar clamp.

You're all set! Happy scooting!

Replacement Parts Needed for This Repair:

The replacement part you'll need for this repair is the RGS-1 Stem Collar Clamp. This is named as an RGS-1 stem collar clamp, however it is also suitable for the RGS-0 3Style Scooter. You can find this by browsing our parts shop.

Within Your Warranty?

Please contact our customer service team who will be more than happy to help assist with any questions you have.