How to Change the Stem Collar Clamps on Your RGS-2 & RGS-3 Scooter

 

Step 1: 

Open up the stem collar clamp on the neck of your scooter.

Step 2:

Using the smallest Allen key that came with your scooter, unscrew the screw in the stem collar clamp by turning it anticlockwise.

Step 3: 

Take out the screw from the collar clamp and place to a side.

Step 4:

Unscrew the side bolt on the clamp, but don't remove it completely.

Step 5:

Press the metal button on the scooter's neck and lift the handlebar up to detach it from the body.

Step 6: 

Take the stem collar clamp mechanism off from the neck of the scooter.

Step 7: 

Get your new stem collar clamp and attach it to the bottom of the handlebars.

Step 8: 

Insert the handlebars back onto the body of the scooter with the stem collar clamp in place.

Step 9: 

Tighten the side bolt on the stem collar clamp.

Step 10:

Using the same Allen key as before, tighten the screw back onto the stem collar clamp by turning clockwise.

Step 11: 

Close the stem collar clamp.

You're all set! Happy scooting!

 

Replacement Parts Needed for This Repair:

The replacement part you'll need for this repair is the RGS-2 & RGS-3 Stem Collar Clamp. You can find this by browsing our parts shop.

 

Within Your Warranty?

Please contact our customer service team who will be more than happy to help assist with any questions you have.

Contact us and we'll give you the part you need for free.

 

Outside of Your Warranty?

Please visit our parts shop on our website where we sell a range of parts at a low cost.