How To Install New Wheels On Your RGS-0 Kids Scooter
How To Change The Front Wheels Of Your RGS-0 Scooter:
Step 1:
Using an Allen key that you can find in the pack of tools that came with your scooter, insert into the bolt in the centre of the wheel and unscrew.
Important!
if you're changing the right wheel, you'll have to unscrew anticlockwise. If you're changing the left wheel, you'll have to unscrew clockwise.
Step 2:
Take out the bolt from the centre of the wheel.
Step 3:
Take off the wheel from the scooter.
Step 4:
Place the new wheel onto the scooter.
Step 5:
Place the bolt back into the centre of the wheel and screw on.
Step 6:
Using the Allen key again, tighten the bolt in the wheel.
Step 7:
Screw the bolt until it can't turn anymore.
You're all set! Happy Scooting!
How To Change The Rear Wheels Of Your RGS-0 Children's Scooter:
Tools Required For This Repair
Important!
The bolts holding the front wheels into place loosen and tighten in different directions. This is so they don't loosen when the scooter is in motion. It's extremely important to use the correct bolt for each wheel.
Step 1:
Insert the two included Allen keys into both sides of the bold in the centre of the rear wheel.
Step 2:
Keep the left Allen key still in the bolt while you use the other Allen key to unscrew the screw.
Step 3:
The screw should now be loose on the right side. Take it out and leave it to a side.
Step 4:
Use an Allen key to push out the rear bolt inside of the wheel and put it to a side.
Step 5:
Take out the old wheel from the scooter and insert the new wheel into your scooter.
Important!
Make sure the holes from the wheel and the end of the scooter are lined up.
Step 6:
Push the rear wheel bolt back into the centre of the wheel. Remember to put this in through the right side wheel.
Step 7:
Using the same 2 Allen keys as step 1, hold the left Allen key in place and tighten the screw on the right side.
You're all set! Happy scooting!
Loosening And Tightening The Rear Wheels
The bolt that holds this into place loosens by turning anti clockwise and tightens by turning clockwise.
Within Your Warranty?
Please contact our customer service team who will be more than happy to help assist with any questions you have.
Click HERE to go to our contact form.
Outside of Your Warranty?
Please visit our parts shop on our website where we sell a range of parts at a low cost.
You can either click HERE to go to our parts shop.