How To Install New Wheels On Your RGS-1 3Style Scooter

How To Install New Front Wheels On Your RGS-1 Kids Scooter:

 

Tools Required For This Repair

For this repair you will need the medium sized Allen key provided in the box of your original order.

 

Step 1:

Using an Allen key that you can find in the pack of tools that came with your scooter, insert into the bolt in the centre of the wheel and loosen.

Important!

The bolts holding the front wheels into place loosen and tighten in different directions. This is so they don't loosen when the scooter is in motion. It's extremely important to use the correct bolt for each wheel.

Loosening And Tightening The Front Left Wheel;
The front left wheel bolt (if standing on the scooter) loosens by turning clockwise and tightens by turning anti clockwise.


Loosening And Tightening The Front Right Wheel:
The front right wheel bolt (if standing on the scooter) loosens by turning anti clockwise and tightens by turning clockwise.

 Step 2:

Take out the bolt from the centre of the wheel.

Step 3:

Take off the wheel from the scooter.

Step 4:

Place the new front wheel onto the scooter.

Step 5: 

Place the bolt back in the centre of the wheel and screw on.

Step 6:

Using the Allen key again, tighten the bolt into the wheel.

 

You're all set!
Happy Scooting!

 

Step 1:

Insert the two Allen keys that came with your scooter into the screws on each side of the rear wheel.

 

Step 2:

Keep the left Allen key steady in the bolt while you use the other to unscrew the screw.

 

Step 3: 

Take the screw out of the rear wheel. Then, using an Allen key, push the rear wheel bolt out of the wheel.

 

Step 4:

Take out the old wheel from the scooter.

 

Step 5:

Put your new wheel into your scooter.

Make sure that the holes in the wheel and the end of the scooter are aligned so the bolt fits securely into the scooter.

 Additionally, make sure the rear wheel bolt is turned the correct way so it fits properly into the wheel.

 

Step 6:

Push the rear wheel bolt into the wheel.

 

Step 7:

Using two Allen keys again, hold the left Allen key in place and tighten the screw on the right side.

 

You're all set!
Happy Scooting!

 

Within Your Warranty?

Please contact our customer service team who will be more than happy to help assist with any questions you have.

Click HERE to go to our contact form.

Outside of Your Warranty?

Please visit our parts shop on our website where we sell a range of parts at a low cost.

You can either click HERE to go to our parts shop.