Installing A Spring On The Assembly

How to Install The Spring On Your Steering Assembly - RGS-2 & RGS-3

Tools Required For This Repair

For this repair you will need a Philip head screwdriver.

Step 1:

Use a Phillip head screwdriver to loosen one screw on the metal plate by twisting it anticlockwise.

Step 2:

Take out the screw and put it to a side.

Step 3:

Pivot the metal plate to the side until the top of the spring is visible, then push the spring out of the steering assembly. If needed, loosed the other screw to allow the metal plate to pivot more easily.

Step 4:

Insert the new steering spring into the assembly. Then, pivot the metal plate back over the top of the spring.

Warning:

Make sure the wider part of the spring is directly below the metal plate.

Step 5:

Tighten the screw back onto the metal plate with a screwdriver by twisting clockwise.

Want to learn how to install the steering assembly in your scooter? Check out our ' How to install the steering assembly in your RGS-2 & RGS-3 Scooter' guide now!

Within Your Warranty?

Please contact our customer service team who will be more than happy to help assist with any parts you may require.

Click HERE to go to our contact form.

Outside of Your Warranty?

Please visit our parts shop on our website where we sell a range of parts at a low cost.

You can either click HERE to go to our parts shop or you can select the images in the steps with "Click Me For Part" to go directly to the part shown in the image.