Install a New Height Adjustment Button on Your RGS-0 & RGS-1 Scooter

How to Install a New Height Adjustment Button on Your RGS-0 Toddler Scooter: 

Step 1:

Open the clasp on the neck of your scooter, then use the flat side of Allen key to unscrew the side bolt on the clasp. You can find an Allen key in the pack that came with your 3Style Scooter.

Step 2:

Using the other side of the Allen key (the pointed side), unscrew the screw on the same clasp. 

Step 3: 

Push in the metal button and pull the handlebar up. The handlebar should now be removed from the rest of the scooter. 

Step 4:

Turn the handlebar upside down, so the hole at the bottom is exposed. Warning, this next part is fiddly!  Using one hand, push in the metal button. With the other hand, use an Allen key to pull out the height adjustment button mechanism out of the body of the scooter. Be careful as the button may become loose.

Step 5:

Get your new height adjustment button and insert in the same way the old one was displayed. This means that the curved metal part of the mechanism should be inside the neck of the scooter. 

Step 6:

Slide the clasp back onto the bottom of the handlebar, and clip the handlebar back onto the bottom of the scooter. Make sure to push the button in, and align it with the holes in the bottom of the scooter. Once aligned, everything should click securely into place

Step 7:

Using the same Allen key, use the flat side to tighten the side bolt on the clasp.

Step 8:

Using the pointed side of the Allen key, tighten the screw on the clasp.

Step 9:

Close the clasp.

 

You're all set! Happy Scooting!