Installing Spring Assembly

Installing The Spring Assembly


Tools Required For This Repair

For this repair you will need a philip head screwdriver and the medium sized allen key provided in the box of your original order.


Step 1

Place your 3Style Scooter on a table or similar surface upside-down, this will allow you to have easy access to the bottom of the front of the scooter/steering column.

Step 2

Remove the two shank bolts located at the top going through the metal plate.

Step 3

Then remove the small screws which also go through the metal fender plate.

Step 4

Take off the metal fender plate.

Step 5

Remove the plastic guard.

Step 6

Pull the wheel shank axle off from the base and put these to one side.

Step 7

Remove any remainder of the spring. You can use one of your allen keys to help ease this out.

Step 8

Once the spring has been removed, set aside the scooter for now and retrieve your wheel shank axle.

Step 9

Remove the small screws located on the axle which secure the wheels in place as seen in this picture.

Step 10

Once the screws have been removed you can discard the middle plastic spring assembly. Before this is thrown please make sure to remove the small nuts on the old spring assembly as these will be needed on your new one.

Step 11

Put the screw through one of the wheel shank axle’s. Push this through the side where the plastic is flat around the hole. The small metal washer fits into this side.

Step 12

Put one of the smaller nuts into place on the new spring assembly and screw the wheel shank axle into place.

Step 13

Repeat this for the other side of the wheel shank axle. The wheel shank axle, once completed will look like this.

Step 14

Position the wheels back onto the scooter, making sure that the spring slots into the hole on the base.

Step 15

Put the plastic guard back into place.

Step 16

Put the metal fender plate back onto the scooter.

Step 17

Finally secure the shank bolts and small screws tightly into place.





Within Your Warranty?

Please contact our customer service team who will be more than happy to help assist with any parts you may require.

Click HERE to go to our contact form.

Outside of Your Warranty?

Please visit our parts shop on our website where we sell a range of parts at a low cost.

You can either click HERE to go to our parts shop or you can select the images in the steps with "Click Me For Part" to go directly to the part shown in the image.